SeaFrogs Vacuum Pump VPS-100 Pre-Dive Vacuum Leak Check System for Seafrogs Meikon
$106.00
Last updated on November 8, 2024 6:29 am Details
- Designed for Seafrogs housing for Sony FX3 FX30 A7 II NG A7R III A7M3 A7R IV A7S III A7R V A9 II, for Canon 6D II 5D IV, EOSR EOS PR EOS R5 for Nikon Z6 II Z7II Case with Vacuum Pump System Design (More compatible models please check the description)
- The vacuum pump system is used for checking the water tightness of underwater camera housing before submerging or using when diving / snorkeling above 40 meters
- The complete electronic circuit and the battery are located in the robust anodized aluminum one-way valve body for even more convenient operation and ease of installation
- VPS-100 features a calibrated pressure sensor and processor and the The green/red LEDs are visible through the transparent acrylic circular window
- The installation is simple and straightforward, just screwing the detector into the accessory port, draw a vacuum on your housing and wait for few minutes, then you can check the water tightness immediately
| Product Dimensions | 3.94 x 2.36 x 1.18 inches |
|---|---|
| Item Weight | 0.007 ounces |
| Item model number | HF800164 |
| Date First Available | November 12, 2021 |
| Manufacturer | Seafrogs |
Shipping & Delivery Information
We commit to providing you with the best shopping experience through Amazon. The shipping policy includes detailed information below:
Shipping Costs: Amazon's policy will calculate shipping costs. You can check the specific shipping fees for each product on the product page.
Delivery Time: The delivery time is usually 3 to 7 business days, depending on your location. When you place your order, the system will display specific delivery time information.
Delivery Areas: Amazon provides shipping services to many different areas. Please refer to the information on the product page to see if the delivery can reach your address.
Return Policy: If you are not satisfied, please see Amazon's return policy. You can find detailed information on Amazon's site.
For more about the shipping policy, visit Amazon's Shipping Policy.
9 reviews for SeaFrogs Vacuum Pump VPS-100 Pre-Dive Vacuum Leak Check System for Seafrogs Meikon
Add a review
bob –
super Ware
DH –
This kit gives plenty of piece of mind to know you’ve sealed your camera housing correctly. Totally worth the price.
Beware, though. When you’re done testing, make sure you put the test plug back on. I was in a hurry one time and forgot to replace it and leaving the test port open defeats the whole point of the housing. A design improvement SeaFrogs could make on their housings is to put a hole in the test plug and a lanyard between the plug and the housing. That way this hanging plug would be more obvious than just an empty test port.
Marshal Shlafer –
The camera fits into the housing super snug and won’t seat properly all the way. The housing button for the camera’s power button and shutter lender do not line up.
Amazon Customer –
I wasn’t sure I needed this, but it turned out to be essential. I had never shot with a housing before, so I went through all the setup of silicone grease on o rings, etc etc. The vacuum is annoying to pump because the handle is so small, but on the second day, I missed an eyelash across the main o ring. I had pumped the housing to green and was about to jump off the boat when it went red. Saved me $3k in camera gear. The SeaFrogs housing was fantastic, 10% the price of everyone else’s, and I got incredible shots of whale sharks, mantas, and dolphins. 11/10.
Theodore O –
After spending a good deal of money on a housing, strobe, and more for a mirrorless camera I plan on using for SCUBA diving I didn’t really want to spend another $100 or so on this device, rather than on more photo toys. Then it hit me: this relatively inexpensive device may help me detect and prevent housing leaks that might ultimately ruin more than $1,000 worth of stuff. Works easily and as advertised on my Sea Frogs/Salted Line housing. Knocked 1 star off rating because you really have to pump this gizmo a lot to get it to show the green “all’s well” light.
Hloupej_Honza –
Une pompe à vide vendue 100€, le vendeur est très bien et le produit conforme. Mais je trouve le prix aberrant et qu’il n’y ai pas une autre marque à réaliser ce type d’objet.
Michael Martinez –
Worked to test
Theodore O –
Please be extremely careful with threading the vacuum pump to your housing. They manufactured a bad thread and it was resisting to fully seal. There was no damage to the housing but the vacuum pump thread was stripped and I am sending it back. Hopefully the re-ordered pump is better if not I’ll probably return everything
CG Crippen –
This company sucks. Sold an item that doesn’t fit the camera for which it’s advertised. The housing doesn’t fit the XT4. The power switch doesn’t engage the power button adequately to turn the camera on.